TL;DR: Your RTM company may be an Accountable Person for your higher-risk building, depending on which repairing obligations it holds. The Building Safety Act 2022 requires you to have competent people overseeing building safety -- but on a volunteer board, "everyone is responsible" quickly becomes "nobody is responsible." Designating a Building Safety Director gives the Building Safety Regulator a named, competent individual to point to. Here is what that role involves, who should take it on, and how to set it up properly.
Key takeaways:
- The Act refers to directors appointed "for a building safety purpose" (s.111 and s.161(4)), but no law requires your RTM company to appoint one
- If your building is 18m+ or 7+ storeys with 2+ residential units, your RTM company has legal duties under the BSA
- The role covers safety case ownership, occurrence reporting, PEEPs coordination, contractor oversight, and BSR liaison
- No professional qualification is required -- competence means understanding the BSA, your building's risks, and your safety systems
- Every director can be personally liable under s.161; a narrow carve-out for unpaid directors applies only where some directors are paid for a building safety purpose
What Is a Building Safety Director?
The Building Safety Act 2022 mentions building safety directors in two places, but neither requires you to appoint one.
- Section 111, in Part 4, is headed "Building safety directors of resident management companies". It lets regulations write rules into an RMC's articles about appointing, paying and removing a director "for a building safety purpose". It is in force, but we have found no regulations made under it, so it has no practical effect yet. It is written for RMCs, and leaves the definition of "resident management company" to those regulations.
- Section 161(4) covers RTM companies, RMCs and commonhold associations. It changes who is personally liable if some directors are paid for a building safety purpose. The liability section below explains how.
So "Building Safety Director" is a role your board can choose to create. What the law does require is competence: an Accountable Person must have the relevant competence or appoint someone who has it.
Where an RTM company is an Accountable Person, the duty sits with the company -- the corporate entity that acquired the right to manage. But a company cannot assess risks, file reports, or liaise with the Building Safety Regulator. People do those things. The BSR expects you to name the individuals who are responsible, demonstrate their competence, and document their authority.
A Building Safety Director is the practical answer to that expectation. It is the director on your board who takes lead responsibility for BSA compliance -- not doing every task personally, but ensuring the right things happen, the right records are kept, and the right people are accountable when the BSR asks questions.
APs and PAPs must either have the relevant competence or appoint someone with the relevant competence to help carry out their duties.
(BSR guidance, Safety in high-rise residential buildings: accountable persons)
This is different from the Building Safety Manager role, which was proposed during the passage of the Bill but removed from the final legislation. Some organisations use that title operationally, but it carries no statutory weight. For a detailed breakdown of the Accountable Person role, see Accountable Person duties under the Building Safety Act.
When Does Your RTM Company Need One?
Not every RTM company has BSA obligations. The Act applies to higher-risk buildings in England:
- 18 metres or more in height, or 7 or more storeys, AND
- 2 or more residential units
If your building meets these criteria, your RTM company may be an Accountable Person under section 72 of the BSA — depending on the repairing obligations transferred under CLRA 2002 s.96. In most RTM scenarios the freeholder remains the Principal Accountable Person, because RTM acquires management functions and not the legal estate. The PAP test is in section 73 and is fact-specific to the building. The RTM company may still be a separate Accountable Person for the parts where it holds repairing obligations — see Accountable Person vs Principal Accountable Person for how to determine this.
There are over 12,300 active RTM companies registered at Companies House. Not all manage higher-risk buildings -- but those that do carry the full weight of BSA obligations. If your building qualifies, you need someone on your board who owns that responsibility.
Check if your building qualifies as higher-risk
What if you have a managing agent?
Some RTM companies appoint managing agents to handle day-to-day operations. This does not transfer Accountable Person status. Your RTM company remains legally responsible. The managing agent acts on your behalf but does not assume your BSA duties.
This makes the Building Safety Director role even more important in RTM companies that use agents: someone on the board must oversee whether the agent is actually meeting your BSA obligations, not just managing repairs and service charges. For more on how RTM companies navigate BSA obligations generally, see RTM companies and the Building Safety Act.
What Does a Building Safety Director Actually Do?
The role is about oversight, coordination, and accountability -- not doing every task personally. In practice, the Building Safety Director:
Owns the Safety Case. The safety case report is the central document demonstrating how your building's risks are identified, assessed, and managed. Someone must ensure it exists, stays current, and accurately reflects reality. That is the Building Safety Director.
Manages the mandatory occurrence reporting process. When a safety-related event occurs -- structural failure, fire spread risk, cladding issues -- the Accountable Person must report it to the BSR. The Building Safety Director ensures reporting procedures exist, the board knows when to trigger them, and reports are filed within the statutory timeframes.
Coordinates PEEPs and resident engagement. Personal Emergency Evacuation Plans for residents who need assistance during evacuation, plus the broader residents' engagement strategy under section 91. The Building Safety Director ensures these are in place, reviewed, and communicated.
Liaises with the BSR. When the BSR contacts your building -- inspection, information request, assessment -- the Building Safety Director can act as the point of contact. If your RTM company is the Principal Accountable Person, BSR guidance says someone from the organisation can be its single point of contact. The only statutory requirement is to name a contact in the registration application (SI 2023/315 reg 15). They coordinate the response, gather evidence, and represent the RTM company.
Ensures the Golden Thread is maintained. The digital record of building safety information must be accurate, accessible, and up to date. The Building Safety Director ensures information flows into the system and nothing falls through the cracks.
Reports to the board and AGM. Regular updates on compliance status, upcoming deadlines, and outstanding actions. This keeps all directors informed and creates documented evidence of active governance.
Oversees contractor safety competence. When contractors work on fire safety systems, cladding, or structural elements, someone must verify their competence and check the evidence.
The key distinction: the Building Safety Director does not need to be the expert. They ensure expert work gets done, documented, and reviewed.
The Competence Question
This is where most RTM directors get anxious. You are a volunteer. You might be an accountant, a teacher, or a retiree. The BSA is asking you to demonstrate competence in building safety management. What does that actually mean?
The BSR's competence framework does not require formal professional qualifications for Accountable Persons or their representatives. It requires demonstrable competence -- meaning you can show you understand:
- The regulatory framework: what the BSA requires of your building
- Your building's risk profile: what the specific hazards are (fire, structural, etc.)
- Your safety management systems: how risks are identified, assessed, managed, and recorded
- When to seek specialist help: knowing the limits of your knowledge and bringing in professionals
For volunteer directors taking on the Building Safety Director role, competence typically comes from a combination of:
Structured training. TPI, FPRA, and RICS all offer courses for building managers and Accountable Persons. The BSR also publishes free guidance on GOV.UK.
Self-directed learning. BSR guidance documents, industry webinars, and professional networks. The BSR covers each obligation in detail on its website.
Professional advisers. Fire risk assessors, structural engineers, building safety consultants. The Building Safety Director does not need to be the expert -- but they need to know when to bring experts in.
Document everything. The BSR will not test you with an exam. They will look at what training you have completed, what guidance you have read, what professional advice you have sought, and whether your decisions show an understanding of building safety principles. A training log, a reading list, and records of professional consultations build your competence evidence over time.
What Happens Without One?
When no single director owns building safety, responsibility diffuses across the board. This creates three specific problems:
The "everyone's job is nobody's job" failure. Board minutes say "building safety discussed." But who is following up on the fire risk assessment actions? Who checked whether the contractor completed the compartmentation work? Who filed the mandatory occurrence report within the statutory deadline? When responsibility is shared equally, no one feels personally accountable for the outcome.
BSR enforcement becomes harder to defend. The BSR can issue compliance notices to Accountable Persons who fail to comply, and contravening one is a criminal offence. When every director shares responsibility equally, demonstrating due diligence becomes harder. A designated Building Safety Director with documented competence is the strongest evidence your RTM company takes its obligations seriously. See Building Safety Act penalties for non-compliance for more on the enforcement framework.
Personal liability stays with every director. Under section 161 of the Building Safety Act, when a company commits a Part 4 offence with a director's consent or connivance, or through their neglect, that director is personally guilty too. If the company's affairs are managed by its members, members count as directors.
There is one statutory carve-out. Under section 161(4), if some of an RTM company's directors (but not all) are appointed for a building safety purpose and are entitled to be paid, the unpaid directors fall outside section 161 for Part 4 offences. Naming an unpaid volunteer as Building Safety Director does not trigger it. Whether your company can pay a director depends on its articles, so check them before relying on this.
The Fire Safety Order has its own director-liability rule, article 32(8)-(9), with no equivalent carve-out. A designated director with documented activity still helps: it shows the board allocated responsibility, which is what a neglect allegation tests.
The Building Safety Act 2025 update covers recent enforcement activity and the BSR's evolving approach to compliance assessment.
How to Appoint a Building Safety Director
This does not require complex governance. It requires clarity and documentation.
1. Board resolution
Pass a formal resolution at a board meeting (or by written resolution under your articles) appointing a named director as Building Safety Director. Record it in the minutes with the date, the director's name, and the scope of their authority.
2. Define scope and authority
Document what the Building Safety Director is authorised to do:
- Engage fire risk assessors and building safety consultants within an agreed budget
- Submit mandatory occurrence reports to the BSR on behalf of the company
- Coordinate the residents' engagement strategy
- Access and maintain the building's safety records
- Report to the board at agreed intervals (monthly or quarterly)
- Escalate urgent safety issues to the full board without waiting for the next scheduled meeting
3. Ensure adequate resources
The role needs time and budget. If the Building Safety Director is a volunteer, the board should acknowledge the time commitment (typically 5-10 hours per month for a single building) and authorise reasonable expenditure on training, professional advice, and safety management tools.
4. Set up a reporting cadence
Monthly written updates to the board covering: compliance status, outstanding actions, upcoming deadlines, contractor activity, and any BSR correspondence. Quarterly presentation at board meetings for discussion and decision-making.
5. Document competence development
Start a training log from day one. Record courses completed, guidance documents read, webinars attended, and professional advice received. This becomes your competence evidence for the BSR.
Template checklist for the appointment resolution:
- Named director appointed as Building Safety Director
- Scope of authority defined in writing
- Budget for training and professional advice approved
- Reporting cadence agreed (monthly updates, quarterly board reports)
- Training log established
- Building safety records access confirmed
- Escalation procedure for urgent safety issues documented
Practical Next Steps
If your RTM company manages a higher-risk building and has not yet designated a Building Safety Director, here is what to do this month:
-
Confirm your building's HRB status. Use the building checker tool or check the BSR public register.
-
Identify a willing director. Someone organised, available, and willing to learn -- not necessarily the most technically knowledgeable person on the board.
-
Pass a board resolution. Use the checklist above.
-
Book initial training. TPI, FPRA, or a local BSA training provider. Even a single introductory course demonstrates you are building competence.
-
Audit your current safety records. Does your RTM company have a safety case? PEEPs? FRA action tracking? Identifying the gaps is the new Building Safety Director's first task.
-
Set up a compliance tracking system. The Building Safety Director needs a single place to track obligations, deadlines, and evidence.
The BSR does not expect perfection. It expects demonstrable effort and a clear structure for managing building safety. Appointing a Building Safety Director is the single most effective step an RTM board can take.
The RTM Director's Building Safety Compliance Guide
Free downloadable guide for RTM directors covering BSA compliance obligations, service charge budgeting for building safety, insurance requirements, contractor management, and AGM duties. Written for volunteer directors, not lawyers.
